Aerodynamics Discuss the concepts of aerodynamics here

Servo tabs for a twisty wing?

Old 08-03-2019, 12:47 PM
  #1  
Steverino
New Member
Thread Starter
 
Join Date: Jul 2019
Posts: 3
Default Servo tabs for a twisty wing?

I've never flown a "twisty wing" slope glider. It's my understanding that a 'pitcheron' uses the twisty wings for both elevator and aileron function, and that a 'wingeron' uses the twisty wing for only aileron use.

In reading on forums I've learned that these gliders need powerful servos to twist the wings.

While digging through my big box of wrecked plane parts I got to looking at a glider wing half that had a servo mounted in it that operated the aileron, and I wondered if that aileron could instead be used as a 'servo tab' to twist the wing panel.

I'm thinking that someone must have tried doing it by now.
Steverino is offline  
Old 08-03-2019, 01:20 PM
  #2  
Steverino
New Member
Thread Starter
 
Join Date: Jul 2019
Posts: 3
Default

Well I got to thinkin' and for it to work the servo has to be mounted in the fuselage, not the wing.

The servo needs to operate the tab in such a way that the tab moves back into the neutral position when the wing twists as much as the pilot wanted.
Steverino is offline  
Old 09-23-2022, 11:44 PM
  #3  
Wildflyer
Past President of PSSF
 
Wildflyer's Avatar
 
Join Date: Sep 2009
Location: Lacey WA, 1 mile E of Mushroom Corner
Posts: 2,245
Default

The old Taube airplane had twisting wings, and the models I have seen used a strong servo in the fuselage, pulling and releasing steel cables. They ran out the wing to a post about at the spar with pulleys at top and bottom, then the cables went back to the trailing edge. Pull on the top cable and the trailing edge rises, and the leading edge dropped. Of course, the opposite thing happened on the other side.
As I understand that in the full-size plane, the wires connected to the joystick above and below the point of side-to-side rotation. The cables to the elevator worked the same way. probably the rudder was very similar.
I was never interested in building a Taube, so I didn't try to study it very well.
It would have to be a wing structure that will allow twisting around the spar. A full D tube wing would not work.
Wildflyer is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
AEAJR
Beginners
166
11-02-2021 01:03 PM
Flite-Metal
Electric Ducted Fan Jets
548
08-25-2021 12:35 PM
lakeside1000
Delta & Flying Wings
9
12-29-2011 04:49 PM
WayneG
Hi-Performance and Sailplanes
21
05-29-2011 08:37 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Quick Reply: Servo tabs for a twisty wing?


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.

Page generated in 0.08634 seconds with 11 queries