Super Cub Aileron Control Horns
02-24-2009, 04:47 PM
#1
Member
Thread Starter
Join Date: Jan 2009
Location: Formerly Chicago,Now Huntley,Il
Posts: 329
Super Cub Aileron Control Horns
Good Morning All,,
I'm modding a SC for ailerons.
Is it better to put the aileron control horn near the inside edge or in the middle of the aileron?
I'm modding a SC for ailerons.
Is it better to put the aileron control horn near the inside edge or in the middle of the aileron?
02-24-2009, 10:01 PM
#4
E-Pilot
Join Date: Jul 2007
Location: Peoria, Arizona
Posts: 444
Originally Posted by Larry G
My friend and I both put the horn about a half inch from the inboard edge of the aileron. Seems to work fine.
02-25-2009, 03:59 PM
#5
Member
Thread Starter
Join Date: Jan 2009
Location: Formerly Chicago,Now Huntley,Il
Posts: 329
I'm having a brain fade or CRS.
Hinge line
Hinge line
Originally Posted by Voltron
The holes in the control horn that the clevis from the servo connects to should be centered on the hinge line.
02-25-2009, 04:32 PM
#6
Member
Join Date: May 2008
Location: Finger Lakes Region, NY
Posts: 377
The hinge line is the gap between the trailing edge of the wing and the front edge of the aileron. Its the point where the aileron attaches to the wing.
Voltron
Voltron
Last edited by Voltron; 02-25-2009 at 04:34 PM. Reason: typo
02-25-2009, 05:26 PM
#7
Member
Thread Starter
Join Date: Jan 2009
Location: Formerly Chicago,Now Huntley,Il
Posts: 329
DUH!
I knew that. Damm CRS.
Thanks
I knew that. Damm CRS.Thanks
Originally Posted by Voltron
The hinge line is the gap between the trailing edge of the wing and the front edge of the aileron. Its the point where the aileron attaches to the wing.
Voltron
Voltron
!LOL 
your bub, steve
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
