Sport Planes (Formerly I/C & Gas Conversion) Discuss I/C or Gas Conversions, Aerobatic Planes and Sport Aircraft

Ace GLH

Old 12-13-2015, 03:24 AM
  #51  
Dave180
Nonprofit User
Thread Starter
 
Join Date: Dec 2012
Location: Nonprofit
Posts: 104
Default

Tried a few different props. More rpms now.

https://youtu.be/-5Xmeit6pJE
Attached Images
File Type: jpg
glh on 3s mph.JPG (7.7 KB, 333 views)

Last edited by Dave180; 01-12-2016 at 01:09 AM.
Dave180 is offline  
Old 12-14-2015, 05:21 AM
  #52  
Wildflyer
Past President of PSSF
 
Wildflyer's Avatar
 
Join Date: Sep 2009
Location: Lacey WA, 1 mile E of Mushroom Corner
Posts: 1,986
Default

I was just digging around in my model storage area and found a GLH kit ready to build.

I guess it was one I had for back up, from 1985. It will be cool to build it with today's equipment.
Wildflyer is offline  
Old 12-14-2015, 06:51 AM
  #53  
Dave180
Nonprofit User
Thread Starter
 
Join Date: Dec 2012
Location: Nonprofit
Posts: 104
Default

Cool. I had an ace catalog long time ago and remember seeing the plane in there. I wonder how it would work with one of those neu motors that do like 200mph. I'll stick with the cheap motors that are slower.
Dave180 is offline  
Old 12-15-2015, 06:16 AM
  #54  
Wildflyer
Past President of PSSF
 
Wildflyer's Avatar
 
Join Date: Sep 2009
Location: Lacey WA, 1 mile E of Mushroom Corner
Posts: 1,986
Default

I've got some insane Little Screamer motors, they should do the trick.
Wildflyer is offline  
Old 12-16-2015, 04:32 AM
  #55  
Dave180
Nonprofit User
Thread Starter
 
Join Date: Dec 2012
Location: Nonprofit
Posts: 104
Default

I'd like to see a chart on watts vs speed. From what I've read, it seems that the people with the big name motors are trying to pull around 70amps with 4s batteries or more and not getting much run time. This gets them like 140+mph depending on design. I think once you get to 120mph, it's a big wall of air after that. Watts go up exponential. I'll probably go to 4s and see if I can get an extra 10mph. I'm only pulling 40 amps on my 3s pack.
Dave180 is offline  
Old 12-16-2015, 07:49 AM
  #56  
Wildflyer
Past President of PSSF
 
Wildflyer's Avatar
 
Join Date: Sep 2009
Location: Lacey WA, 1 mile E of Mushroom Corner
Posts: 1,986
Default

I believe air resistance probably go up by the square of speed, or maybe exponentially, which may be the same.

I don't know how a chart could be set up because there are many variables.

Anyway, it takes a lot more power to go faster and faster. We had a boat that went 47 mph with only a straight 6 motor, but if we had tried to go 94, it would have need a supercharged V8.

High speed planes need to be as streamlined as possible, look at the 200+ mph pylon racers, the wings are not much thicker than our GLH's.

Speed is fun in the right place, I had a F-27 Striker with and over sized motor, it hit 125 mph level, and was probably doing 130 when it tried to dig a hole in the Wyoming ground. It was so dang fast and loud I couldn't fly it at my home field.
Wildflyer is offline  
Old 12-16-2015, 05:13 PM
  #57  
Dave180
Nonprofit User
Thread Starter
 
Join Date: Dec 2012
Location: Nonprofit
Posts: 104
Default

Mines actually pretty quiet for some reason.
Dave180 is offline  
Old 12-16-2015, 11:22 PM
  #58  
Gandalf223
New Member
 
Join Date: Feb 2014
Posts: 1
Default

Fun thread. I built a GLH 20-odd years ago (kit, foam wing) and flew it with a TeeDee .049 - no throttle. I never clocked the speed but it was the most fun I ever had with an .049. Until the day I pulled a high speed loop and the receiver battery decided to exit through the oil-soaked bottom hatch. The GLH did 4-foot loops, a bit lower each time, until it tried to enter a cloud (cumulus dirtus.) I actually had time to turn off my transmitter, collapse its antenna, and enjoy the final show...
Gandalf223 is offline  
Old 12-17-2015, 01:12 AM
  #59  
Dave180
Nonprofit User
Thread Starter
 
Join Date: Dec 2012
Location: Nonprofit
Posts: 104
Default

The only .049 I had ended up on a power pod on a gentle lady. It was the black widow model. I flew it a couple times but it was pretty loud!
Dave180 is offline  
Old 12-30-2015, 11:05 PM
  #60  
Dave180
Nonprofit User
Thread Starter
 
Join Date: Dec 2012
Location: Nonprofit
Posts: 104
Default

I have a 4s battery coming. I have most of the small prop sizes and just need to keep it under 55amps static. Actually all I need is 40amps or around 550watts for 4s. Anything less then 5 minute flights isn't worth it.

Last edited by Dave180; 12-31-2015 at 12:05 AM.
Dave180 is offline  
Old 01-12-2016, 01:04 AM
  #61  
Dave180
Nonprofit User
Thread Starter
 
Join Date: Dec 2012
Location: Nonprofit
Posts: 104
Default

I tested my motor on 4s and its pulling 48 amps easy on a 4.75x4.75 prop. Not fully charged. Took a few tries to balance the prop. Changed the spinner nut out too as it was shaking. Didn't do any thrust tests. Too scary! It's faster yes but not ballistic. Todays run:

https://youtu.be/zVgaiCA9bvg
Attached Images
File Type: jpg
untitled.JPG (7.6 KB, 247 views)
Dave180 is offline  
Old 09-11-2018, 05:53 AM
  #62  
OzMo
New Member
 
OzMo's Avatar
 
Join Date: Sep 2010
Posts: 14
Default

covering a GLH old stock kit, foam wing tonight!
OzMo is offline  
Old 09-11-2018, 05:54 AM
  #63  
OzMo
New Member
 
OzMo's Avatar
 
Join Date: Sep 2010
Posts: 14
Default

dusty old topic eh ! LOL
Had to look up what he used for an ESC 40 should be fine 1300mah 3 cell. 2826 2200kv
OzMo is offline  
Old 09-11-2018, 10:34 AM
  #64  
Don Sims
Administrator
 
Don Sims's Avatar
 
Join Date: Sep 2005
Location: Middle Tennessee
Posts: 12,568
Default

Got any photos of yours Oz?
Don Sims is offline  
Old 09-11-2018, 08:27 PM
  #65  
OzMo
New Member
 
OzMo's Avatar
 
Join Date: Sep 2010
Posts: 14
Default GLH

ultra coat on the wings and the stripes in the fuse. The rest is painted with Slick fabric paint. The gray will have 2 more stripes. White forward against the black and black rearward against the white.
Attached Images
File Type: jpg
DSCN2520.JPG (744.9 KB, 74 views)
OzMo is offline  
Old 09-11-2018, 08:32 PM
  #66  
OzMo
New Member
 
OzMo's Avatar
 
Join Date: Sep 2010
Posts: 14
Talking GLH

The ultra coat on the wings and the stripes in the fuse. The rest is painted with Slick fabric paint. The gray will have 2 more stripes. White forward against the black and black rearward against the white. The uneven lines will be covered by the additional stripes
OzMo is offline  
Old 09-11-2018, 08:36 PM
  #67  
OzMo
New Member
 
OzMo's Avatar
 
Join Date: Sep 2010
Posts: 14
Default

Tulip Slick fabric paint works well with mini roller or it leaves brush strokes.
Cheap at Wally World
OzMo is offline  
Old 09-12-2018, 01:47 AM
  #68  
Don Sims
Administrator
 
Don Sims's Avatar
 
Join Date: Sep 2005
Location: Middle Tennessee
Posts: 12,568
Default

Thanks! You should be able to see that one and keep orientation. Looks great!
Don Sims is offline  
Old 09-12-2018, 06:50 PM
  #69  
OzMo
New Member
 
OzMo's Avatar
 
Join Date: Sep 2010
Posts: 14
Default

Thanks! The GLH is an easy build even from scratch. This one is from a kit but our club has winter time "Build Nights". Several were built from scratch.
This GLH II was a foam wing version. The foam wing was thicker so I used my hot wire to make it the same airfoil as the plan built GLHs. Otherwise it is stock built per the kit instructions.
I don't care for the coverings appearance at the wing center, a black strip of covering same width as the fuse will fix that as well.
OzMo (Ozark, Mo)
OzMo is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kyleservicetech
Batteries & Chargers
11
09-24-2012 06:28 AM
Cowboy
Batteries & Chargers
18
05-21-2012 05:16 PM
Flysohigh
Batteries & Chargers
14
11-09-2011 10:01 PM
hobbypartz
New Product Announcements
3
11-09-2011 03:07 AM
partzee
Batteries & Chargers
4
06-19-2011 10:04 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Quick Reply: Ace GLH


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.

Page generated in 0.11410 seconds with 19 queries