Radiomaster TX16S
04-01-2021, 12:33 AM
#1
New Member
Thread Starter
Join Date: Mar 2021
Posts: 7
Radiomaster TX16S
Hello people! Just purchased a Radio master TX16S. Can anyone tell me how to bind it to a volantex p51 750mm? Have set up my mini Corsair but can't set the Mustang up on same settings. Many thanks.
04-01-2021, 10:25 AM
#2
Super Contributor
Join Date: Oct 2010
Location: Ex UK Brit now in Latvia west coast - Ventspils
Posts: 12,909
First you have to find out what protocol the Volantex uses ... then set that in the Module section of programming.
It also depends what TX16 you bought ( I know you say TX16s, but I've heard many say S when in fact they have Lite - if its the Lite version - then it probably will not work with Volantex ... but if the full S version with 5in1 internal module - then yes it will - once you understand which protocol to use.
It also depends what TX16 you bought ( I know you say TX16s, but I've heard many say S when in fact they have Lite - if its the Lite version - then it probably will not work with Volantex ... but if the full S version with 5in1 internal module - then yes it will - once you understand which protocol to use.
04-01-2021, 10:29 AM
#3
Super Contributor
Join Date: Oct 2010
Location: Ex UK Brit now in Latvia west coast - Ventspils
Posts: 12,909
Here's a list :
https://github.com/pascallanger/DIY-...ols_Details.md
I suggest trying one of the FlySky protocols .... because when Volantex was Lanyu - they used the FlySky basic Tx's in their RTF's.
https://github.com/pascallanger/DIY-...ols_Details.md
I suggest trying one of the FlySky protocols .... because when Volantex was Lanyu - they used the FlySky basic Tx's in their RTF's.
