For Sale DX7 & Rx's, Futaba Skysport, 72mhz RX's...
04-08-2009, 04:39 AM
#1
Misanthropic Member
Thread Starter
Join Date: Jan 2006
Location: West Tennessee
Posts: 557
DX7 & Rx's, Futaba Skysport, 72mhz RX's...
Help Nick cover his SEFF adventure this year!
Spektrum DX7. Very little usage. Was sent in for a checkup about a year ago, firmware updated and checked out great! Has a couple of light scratches on the screen. Comes with (3) AR6100e rx's, all v1.7 or above, and very little use. I have the charger, but it's the old 50ma unit that will take a LONG time to charge the 1500mah nimh.
Futaba Skysport 4 TX and 7channel RX-channel 40. This is a takeout from an RTF trainer, and works great. Comes with the original nicd tx pack as well as a 1700nimh pack.
(3) Hitec Supreme 2 8ch. Channels 58 and 24. One has frayed insulation on the antenna, patched with heat shrink. Shift is selectable.
(2) Hitec Electron 6. Channel 24 and 58. Always been reliable, compatible with JR/Airtronics.
(5) Berg 4L rx's. Channels 24 and 58. Autoshift, TDSR and TDSP. These work great-never had a glitch with any.
(1) Berg 4-Same as above but encased in plastic...
Most of this stuff has been laying around for a while, and I need to get rid of it.
DX7&rx's-$250-SOLD
Futaba Skysport 4-$25-SOLD
Hitec Supreme and Electron 6-$15 each, or all 5 for $65
Berg 4-$15 each, or all 6 for $80-SOLD
All prices include priority shipping to the lower 48. Sorry, but due to severe issues with it in the past, I can't ship out of the country.
Paypal or money order is acceptable, PM for any info!
Thanks!
Spektrum DX7. Very little usage. Was sent in for a checkup about a year ago, firmware updated and checked out great! Has a couple of light scratches on the screen. Comes with (3) AR6100e rx's, all v1.7 or above, and very little use. I have the charger, but it's the old 50ma unit that will take a LONG time to charge the 1500mah nimh.
Futaba Skysport 4 TX and 7channel RX-channel 40. This is a takeout from an RTF trainer, and works great. Comes with the original nicd tx pack as well as a 1700nimh pack.
(3) Hitec Supreme 2 8ch. Channels 58 and 24. One has frayed insulation on the antenna, patched with heat shrink. Shift is selectable.
(2) Hitec Electron 6. Channel 24 and 58. Always been reliable, compatible with JR/Airtronics.
(5) Berg 4L rx's. Channels 24 and 58. Autoshift, TDSR and TDSP. These work great-never had a glitch with any.
(1) Berg 4-Same as above but encased in plastic...
Most of this stuff has been laying around for a while, and I need to get rid of it.
DX7&rx's-$250-SOLD
Futaba Skysport 4-$25-SOLD
Hitec Supreme and Electron 6-$15 each, or all 5 for $65
Berg 4-$15 each, or all 6 for $80-SOLD
All prices include priority shipping to the lower 48. Sorry, but due to severe issues with it in the past, I can't ship out of the country.
Paypal or money order is acceptable, PM for any info!
Thanks!
Last edited by crash_out; 04-12-2009 at 03:20 AM.
04-08-2009, 04:11 PM
#6
Some Assembly Required
Join Date: Feb 2006
Location: Nashville, TN
Posts: 12,070
[QUOTE=crash_out;589460]Yeah, I kind of hate to get rid of it, but it's not really serving any purpose to me right now...
Wish you could be at SEFF with us this year, Tom!
I wish I could too Nick but it's just not in the cards right now.
Wish you could be at SEFF with us this year, Tom!
I wish I could too Nick but it's just not in the cards right now.
04-08-2009, 09:31 PM
#10
Community Moderator
Join Date: Jul 2006
Location: Murfreesboro, TN
Posts: 1,818
Originally Posted by crash_out
You're right, they were 1.6...I THOUGHT they were 1.7..sorry about that.
04-09-2009, 04:02 AM
#13
Community Moderator
Join Date: Jul 2006
Location: Murfreesboro, TN
Posts: 1,818
Originally Posted by crash_out
Nah, I just get dyslexic when I get tired..probably looked at DX7 and thought 1.7...Looking forward to catching you st SEFF again, Dave!
04-12-2009, 05:34 PM
#16
Super Contributor
Join Date: Aug 2006
Location: Huntsville, AL
Posts: 1,550
Just some public feedback for crash_out beyond the i-trader rating.
I couldn't be more pleased with this buy. Everything was packed well and arrived quickly in the exact condition advertised.
THANKS, Crash_out!!
I couldn't be more pleased with this buy. Everything was packed well and arrived quickly in the exact condition advertised.
THANKS, Crash_out!!
04-12-2009, 07:31 PM
#18
Member
Join Date: Jan 2009
Location: Formerly Chicago,Now Huntley,Il
Posts: 329
Originally Posted by max2112
Just some public feedback for crash_out beyond the i-trader rating.
I couldn't be more pleased with this buy. Everything was packed well and arrived quickly in the exact condition advertised.
THANKS, Crash_out!!
I couldn't be more pleased with this buy. Everything was packed well and arrived quickly in the exact condition advertised.
THANKS, Crash_out!!
You are 100% right on this. I had the exact same experience.
I got it so fast
it was like he knew I wanted it before I did.One other addition is he helped me find some clubs near me to contact and I thank him for that.
07-13-2009, 03:36 AM
#19
Member
Join Date: Jul 2009
Posts: 34
Would you trade for this?
DX7 Still up? Would you trade for any of these?
Half Finished Electrifly MiniSlinger For Trade
FEATURES: A speedy Electrifly Mini Slinger. Includes an ElectriFly brushed motor (can be upgraded) and wing. Wing also has two carbon fiber rods for extra stability.
INCLUDES: Mini Slinger, half completed, with: An ElectriFly C-12 Micro Speed Control, 3 spare props, 2 batteries, (8 cell 9.6 volt 2/3AAA 350MAH NIMH) 2 Hitec HS55 Micro Servos, Extra carbon fiber rods, extra push rods and connectors, main motor set up, with canopy, and the wing, which has already been epoxied together, and servos put in, but not glued. Oh, and of course, the manual.
SPECS: Wingspan: 31.5 in (805 mm) Wing Area: 230 in˛ (24.8 dm˛) Weight: 7.5-8.5 oz (213-240 g) Wing Loading: 4.7-5.3 oz/ft˛ (14-16 g/dm˛) Length: 15 in (380 mm)
REQUIRES: Transmitter and receiver.
COMMENTS: This should be a fun plane to build and fly, and possibly modify! It is meant to be fast, so have fun with it!
__________________________________________________ _______________
E-Flite Enticement For Trade
FEATURES: A great flying E-Flite Enticement. The Enticement is a flat foam profile monoplane with precision and aerobatic flight characteristics. Constructed of genuine 3mm Depron foam, this attractive, easy-to-assemble flat foam model improves upon other similar designs in the market and adds the stability and strength that other models are lacking. Compared with other products on the market, the Enticement is easier to assemble, and utilizes high-quality construction and manufacturing techniques. The Enticement’s extraordinary performance is attributed the lightweight, laser-cut Depron foam construction and carbon fiber support rods and carbon fiber firewall set a new industry standard for quality, durability and performance. The optional SFGs and speed brakes facilitate extreme slow flight. This lightweight plane is capable of competition-level performance thanks in part to its unique design that eliminates flex so control response is crisp and precise. Its lightweight design is focused around E-flite’s Park 250 BL Outrunner Motor, with great power-to-weight ratio for top aerobatic performance. This indoor foamie has great stability, strength, and the right blend of characteristics to excel in precision aerobatic flight. The only problem with this plane is that it needs a new Brushless motor. If you think you can figure out what is wrong with the motor, than you have a completed plane.
INCLUDES: An E-Flite Enticement foamy with three E-Flite micro servos, a brushless motor that doesn’t work (maybe does), an Electrifly BL-12 ESC, and a ThunderPower 3 Cell 730 MAH LiPo Battery. The plane has flown twice-before the motor stopped working.
SPECS:
Wingspan:
34 in (860mm)
Overall Length:
33 in (833mm)
Wing Area:
241 sq in (15.5 sq dm)
Flying Weight:
5.0–5.75 oz (140–165 g)
Motor Size:
E-flite Park 250 BL Outrunner Motor, 2200Kv
Prop Size:
8×4 direct drive prop: Black
Speed Control :
Electrifly BL-12 ESC
Control Throw (Ailerons):
1.25 in (35mm) with 25% Expo on Low or 2.0 in (50mm) with 40% Expo on High
Control Throw (Elevator):
1.0 in (25mm) with 20% Expo on Low or 1.5 in (40mm) with 45% Expo on High
Control Throw (Rudder):
1.5 in (40mm) with 30% Expo on Low or 2.75 in (70mm) with 50% Expo on High
Scale:
Indoor F3P/Aerobatic Flyer
REQUIRES: A LiPo battery charger, possibly a new motor, and a Transmitter and Receiver.
COMMENTS: This Spectra has been flown two times by me. It is in excellent condition except for a possibly irreparable motor. Overall this plane flies excellent, and I would recommend it to someone who likes aerobatics.
Half Finished Electrifly MiniSlinger For Trade
FEATURES: A speedy Electrifly Mini Slinger. Includes an ElectriFly brushed motor (can be upgraded) and wing. Wing also has two carbon fiber rods for extra stability.
INCLUDES: Mini Slinger, half completed, with: An ElectriFly C-12 Micro Speed Control, 3 spare props, 2 batteries, (8 cell 9.6 volt 2/3AAA 350MAH NIMH) 2 Hitec HS55 Micro Servos, Extra carbon fiber rods, extra push rods and connectors, main motor set up, with canopy, and the wing, which has already been epoxied together, and servos put in, but not glued. Oh, and of course, the manual.
SPECS: Wingspan: 31.5 in (805 mm) Wing Area: 230 in˛ (24.8 dm˛) Weight: 7.5-8.5 oz (213-240 g) Wing Loading: 4.7-5.3 oz/ft˛ (14-16 g/dm˛) Length: 15 in (380 mm)
REQUIRES: Transmitter and receiver.
COMMENTS: This should be a fun plane to build and fly, and possibly modify! It is meant to be fast, so have fun with it!
__________________________________________________ _______________
E-Flite Enticement For Trade
FEATURES: A great flying E-Flite Enticement. The Enticement is a flat foam profile monoplane with precision and aerobatic flight characteristics. Constructed of genuine 3mm Depron foam, this attractive, easy-to-assemble flat foam model improves upon other similar designs in the market and adds the stability and strength that other models are lacking. Compared with other products on the market, the Enticement is easier to assemble, and utilizes high-quality construction and manufacturing techniques. The Enticement’s extraordinary performance is attributed the lightweight, laser-cut Depron foam construction and carbon fiber support rods and carbon fiber firewall set a new industry standard for quality, durability and performance. The optional SFGs and speed brakes facilitate extreme slow flight. This lightweight plane is capable of competition-level performance thanks in part to its unique design that eliminates flex so control response is crisp and precise. Its lightweight design is focused around E-flite’s Park 250 BL Outrunner Motor, with great power-to-weight ratio for top aerobatic performance. This indoor foamie has great stability, strength, and the right blend of characteristics to excel in precision aerobatic flight. The only problem with this plane is that it needs a new Brushless motor. If you think you can figure out what is wrong with the motor, than you have a completed plane.
INCLUDES: An E-Flite Enticement foamy with three E-Flite micro servos, a brushless motor that doesn’t work (maybe does), an Electrifly BL-12 ESC, and a ThunderPower 3 Cell 730 MAH LiPo Battery. The plane has flown twice-before the motor stopped working.
SPECS:
Wingspan:
34 in (860mm)
Overall Length:
33 in (833mm)
Wing Area:
241 sq in (15.5 sq dm)
Flying Weight:
5.0–5.75 oz (140–165 g)
Motor Size:
E-flite Park 250 BL Outrunner Motor, 2200Kv
Prop Size:
8×4 direct drive prop: Black
Speed Control :
Electrifly BL-12 ESC
Control Throw (Ailerons):
1.25 in (35mm) with 25% Expo on Low or 2.0 in (50mm) with 40% Expo on High
Control Throw (Elevator):
1.0 in (25mm) with 20% Expo on Low or 1.5 in (40mm) with 45% Expo on High
Control Throw (Rudder):
1.5 in (40mm) with 30% Expo on Low or 2.75 in (70mm) with 50% Expo on High
Scale:
Indoor F3P/Aerobatic Flyer
REQUIRES: A LiPo battery charger, possibly a new motor, and a Transmitter and Receiver.
COMMENTS: This Spectra has been flown two times by me. It is in excellent condition except for a possibly irreparable motor. Overall this plane flies excellent, and I would recommend it to someone who likes aerobatics.
