For Sale Almost PNP blade 400 3D
01-24-2009, 05:40 PM
#1
New Member
Thread Starter
Join Date: Jan 2009
Posts: 10
Almost PNP blade 400 3D
Item is sold!!
This is a used blade 400 3D. It comes with the esc, motor, and the stock servos, many extra parts, an 1800mah battery, a 2100mah battery, the stock charger and an wall plug adapter cord. All you need to complete the set is a transmitter, receiver, and gyro. I have only ran about 30 batteries through it.
Extras:
2100mah battery
Wall plug adapter cord
Replacement parts:
1. landing Gear skid set
2. washout control arms
3. horizontal fin stabilizer mount
4. bell mixer arm pushrod set
5. bearings 5x10x4mm
6. landing skid
7. flybar paddles
8. bell mixer pushrod
9. elevator control lever set
10. flybar paddle control frame
11. linkage pushrod set
12. tail rotor shaft
13. head block/rotor housing
14. main shafts
15. spindle/feathering shaft
15. hex wrenched, screws, etc.
16. bind plug
ALL THIS FOR $240!!
Will trade for a t-rex 250.
Go here for pics http://sites.google.com/site/bladecpupgrades/contact-me
This is a used blade 400 3D. It comes with the esc, motor, and the stock servos, many extra parts, an 1800mah battery, a 2100mah battery, the stock charger and an wall plug adapter cord. All you need to complete the set is a transmitter, receiver, and gyro. I have only ran about 30 batteries through it.
Extras:
2100mah battery
Wall plug adapter cord
Replacement parts:
1. landing Gear skid set
2. washout control arms
3. horizontal fin stabilizer mount
4. bell mixer arm pushrod set
5. bearings 5x10x4mm
6. landing skid
7. flybar paddles
8. bell mixer pushrod
9. elevator control lever set
10. flybar paddle control frame
11. linkage pushrod set
12. tail rotor shaft
13. head block/rotor housing
14. main shafts
15. spindle/feathering shaft
15. hex wrenched, screws, etc.
16. bind plug
ALL THIS FOR $240!!
Will trade for a t-rex 250.
Go here for pics http://sites.google.com/site/bladecpupgrades/contact-me
Last edited by helidude22; 02-05-2009 at 05:32 AM. Reason: Item Is sold!
