Mac1z

Landing gear mount fell off wing looks like Pz used caulking for glue any ideas for what to use. Epoxy would work but on hard landing my damage wing where Pz cement came apart from the plastic no damage done.
Thanks Mac1z

Tony G

CA, works like a charm.

If they could only figure out that dam nose gear, I'd love it. I'd rather have a nose gear that was tough and didn't turn, vs the nose gear that always starts with the small crack.

wmcneal

I like to use GE Silicone I. Plenty strong. Comes in white or clear. Won't harm any kind of foam. Available at most hardware stores.

Mac1z

That is what I used just closed the hanger doors, had 3 landings held up great Thanks for the heads up. Mac1z

Rob Cline

Hey that's a great tip - haven't used silicone on foamies before. I found every T-28 I've seen needed glue on those gear mounts; I just used hot glue since sometimes only one corner needs it, and it squirts in real well. Probably heavier than other solutions though.