Larry G

I have 3 of the Turnigy 35-30 series motors. I'm using them on 30-36 oz foam park flyers with 3 cell 2100 20c lipos. Here are the props I am currently using that seem to give me decent power and flight times;

35-30C 1100Kv APC 9x6E

35-30A 1700Kv APC 7x6E or 8x4E

35-30B 1400Kv not used yet, going on a GWS FW190

What is your favorite prop for these motors?

babylon5

Hi larry I have one of this 35-030 1400KV China made outrunner. Not sure if it is on par with Turnigy.
It runs on 7-6 prop at around 25-26 amps and on 8-6 about 44amps which will give me unlimited vertical on my aircraft with the 8-6 prop)

You may want try 7-xx prop first and check out the thrust and current drawn before going for bigger size propellers.

Hope this will help
Cheers

dk_aero

I installed the 35-30C (1100 Kv) in my PZ FW190. Used the stock PZ 10x8 prop. No problems, very smooth and excellent power. With a Great Planes small brushless motor mount, CG was right on.

I have another one that I plan on using in an E-flite Taylorcraft...