View Single Post
Old 02-26-2009, 04:07 PM   #1
Flyboone
twitter.com/flyboone
 
Flyboone's Avatar
 
Join Date: Jan 2009
Location: Nashville
Posts: 75
iTrader: (0)
Friends: (1)
Default Hobby-Lobby F/A-18 Blue Angel EPO



JPG010A F/A-18 Blue Angel RTF
JPG010B F/A-18 Blue Angel ARF
JPG010E F/A-18 Blue Angel Airframe Only


Easy to see, easy to fly, tough EPO foam construction
23-7/8" wingspan, 34-3/4" long, 170 sq. in. wing area, 22 oz. flying weight. Jet is constructed from tough EPO foam and totally pre-decorated. The fan with Outrunner brushless motor is installed and pre-wired to the brushless 30 amp speed control. Assembly takes about an hour, photo illustrated instructions included. The servos are installed for you; all you need to do is connect the pre-bent pushrods to the servo arms and the control horns. The jet includes 5 servos: 2 for ailerons, 2 for elevators, and 1 for nose wheel steering. The main landing gear snaps into place and the nose wheel is held with a setscrew. Jet can be flown either with or without landing gear; conversion takes only seconds. Whether you take off from the ground or hand launch the F-18, the flight character of the jet is exceptional. The smooth running Outrunner motor provides powerful thrust for exciting flying. This jet is quick and has excellent flying manners; it's smooth and predictable with a broad speed range. Jet includes a 3-cell 1300 mAh lipo battery and a balance lipo charger as well as a 4-channel transmitter and a 6-channel receiver. Flight times exceed 5 minutes.

For more information click HERE

Use this thread to discuss any and all things related to F/A-18 Blue Angel
Flyboone is offline  
  Reply With Quote
 
Page generated in 0.05680 seconds with 7 queries