WattFlyer RC Electric Flight Forums - Discuss radio control eflight - View Single Post - Hobbywing Platinum 40a issue
View Single Post
Old 07-15-2014, 07:18 AM
  #1  
thepiper92
Warbird Fanatic
 
thepiper92's Avatar
 
Join Date: Nov 2013
Location: Winnipeg, Canada
Posts: 1,513
Default Hobbywing Platinum 40a issue

So I am having issues changing out the connector on the esc that came with my Blade 450x, and the wire don't seem to want to stay in the solder, could be that the tip is shot. Anyway, I plugged in a Hobbywing Platinum 40a ESC to take the place of the stock one, but I can't get it to work. It constantly beeps, and I read that that means the throttle in not set to zero, but it indeed is. I can't seem to calibrate the throttle either, it beeps the same no matter what. Then, I rebound the radio to the esc, and no the esc goes into programming mode. Is this something to do with the setup of the BeastX system, or the esc malfunctioning? The stock esc does work fine by the way, still have yet to make my first flight.
thepiper92 is offline  
 
Page generated in 0.02816 seconds with 9 queries