WattFlyer RC Electric Flight Forums - Discuss radio control eflight

WattFlyer RC Electric Flight Forums - Discuss radio control eflight (https://www.wattflyer.com/forums/index.php)
-   Hobby Express discussion (https://www.wattflyer.com/forums/forumdisplay.php?f=216)
-   -   Hobby-Lobby F/A-18 Blue Angel EPO (https://www.wattflyer.com/forums/showthread.php?t=44297)

Flyboone 02-26-2009 04:07 PM

Hobby-Lobby F/A-18 Blue Angel EPO

JPG010A F/A-18 Blue Angel RTF
JPG010B F/A-18 Blue Angel ARF
JPG010E F/A-18 Blue Angel Airframe Only

Easy to see, easy to fly, tough EPO foam construction
23-7/8" wingspan, 34-3/4" long, 170 sq. in. wing area, 22 oz. flying weight. Jet is constructed from tough EPO foam and totally pre-decorated. The fan with Outrunner brushless motor is installed and pre-wired to the brushless 30 amp speed control. Assembly takes about an hour, photo illustrated instructions included. The servos are installed for you; all you need to do is connect the pre-bent pushrods to the servo arms and the control horns. The jet includes 5 servos: 2 for ailerons, 2 for elevators, and 1 for nose wheel steering. The main landing gear snaps into place and the nose wheel is held with a setscrew. Jet can be flown either with or without landing gear; conversion takes only seconds. Whether you take off from the ground or hand launch the F-18, the flight character of the jet is exceptional. The smooth running Outrunner motor provides powerful thrust for exciting flying. This jet is quick and has excellent flying manners; it's smooth and predictable with a broad speed range. Jet includes a 3-cell 1300 mAh lipo battery and a balance lipo charger as well as a 4-channel transmitter and a 6-channel receiver. Flight times exceed 5 minutes.

For more information click HERE

Use this thread to discuss any and all things related to F/A-18 Blue Angel

All times are GMT +1. The time now is 03:53 PM.

Powered by: vBulletin
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.

Page generated in 0.06332 seconds with 8 queries