WattFlyer RC Electric Flight Forums - Discuss radio control eflight

WattFlyer RC Electric Flight Forums - Discuss radio control eflight (https://www.wattflyer.com/forums/index.php)
-   Brushless Motor Construction (https://www.wattflyer.com/forums/forumdisplay.php?f=88)
-   -   Viper R/C ESCs - Any experience (https://www.wattflyer.com/forums/showthread.php?t=74684)

amorak 10-13-2014 11:42 PM

Viper R/C ESCs - Any experience
 
Hi all,

Looking at a Viper Air 60A ESC. Pretty cheaply priced, but seem to have decent features. Any comments on them being any good? Looking to get a 60A (60A continuous, 75A burst) even though my motor only draws 40A (Power10) in order to have some headroom incase these things are 'as-advertised'

Anyone use one before?

http://viper-rc.com/air_series.php

CHELLIE 10-14-2014 12:11 AM

Not familiar with the Viper ESC, But the Turnigy ESC are the best of the Best for the Price, Never Ever Had any Problems with them, and this 60 Amp ESC has a UBEC rather than a Linair Bec, it also has a burst of 80 Amps, Turnigy ESC have been Bullet Proof for me, what is the price on the Viper, the Turnigy 60 amp Esc is $34.98


http://www.hobbyking.com:80/hobbykin...og/hw_p60a.jpg


Cont Current: 60A
Burst Current: 80A
BEC Mode: Switching
BEC : 5v / 3A
Input: 5.6v-22v
Weight: 60g
Size: 80x31x14mm
Supported motor speed for all TURNIGY ESCs is;
(Maximum): 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles).

kyleservicetech 10-14-2014 12:19 AM


Originally Posted by amorak (Post 959655)
Hi all,

Looking at a Viper Air 60A ESC. Pretty cheaply priced, but seem to have decent features. Any comments on them being any good? Looking to get a 60A (60A continuous, 75A burst) even though my motor only draws 40A (Power10) in order to have some headroom incase these things are 'as-advertised'

Anyone use one before?

http://viper-rc.com/air_series.php

Check out the Castle Creations Talon line of ESC's. These units use a switching type BEC (Battery Elimination Circuit) with the 90 Amp ESC providing a 20 Amp rating on their BEC. You can safely run them at their rated ampere level without issue.

I've got one, it's built like a cement truck.
http://www.espritmodel.com/castle-cr...hless-esc.aspx

They also have a 35 Amp ESC.
http://www.espritmodel.com/castle-cr...hless-esc.aspx

Bushmen777 10-14-2014 06:38 AM

Nice esc

ron_van_sommeren 10-14-2014 01:18 PM

Forum Title: Brushless Motor Construction
Subtitle: Discuss design and construction of custom Brushless motors


All times are GMT +1. The time now is 02:39 AM.

Powered by: vBulletin
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.

Page generated in 0.06227 seconds with 9 queries